Dave Software Design Solutions licenses FRU The OMAP Flash Recovery Utility was licensed to Software Design Solutions, Inc. (Needs some hand-holding to find the driver file in same directory as that INF file, but it can work.) And then you can follow the other instructions. If it's disconnected, the USB enumeration behaves (on either Windows or Linux) and Windows will see the IDs listed in that INF file.
Contrary to the documentation, you _must_ do more than change JP3. With a serial line connected, nothing works. This might be a useful comment: - Original Message - Subject: Re: Flash Recovery Utilityfor OSK Date: Sun, 16:16:35 -0700 From: David Brownell To: I just used this FRU to load U-Boot 1.1.3, and the essential undocumented trick seems to be disconnecting the serial line. Note that you can replace the file ' u-bootbinOSK' with a different copy of uboot or any other loader if you like. is should connect, download the reflash code, and bootloader: ' u-bootbinOSK' and run the reflash code when unprotects the NOR flash and does the writes the bootloader to flash.run the Flash Recovery Utility from which is ' FlashRecoveryUtility OSK Flash Recovery.exe' 1, choose ' Connect and Download'.install it from the ' USB Windows Driver' folder in extracted from the zip file.disconnect any serial or jtag cables from the OSK (thanx dave).unpack it on a windows XP host (other windows hosts might work).This can be done with a common USB-A-male to USB-B-male cable and a USB-B-female to USB-A-male adapter. you need a USB-A-male to USB-A-male cable.Unfortunately, no longer works at, so it's not likely that he will be able to provide an updated version.:( Rev D1 and later have been reported to not work Please contact and/or and request an updated Flash Recovery Utility if you have a newer board. Is happy to answer email questions about it, but does not support it at present. (through ) has made the Flash Recovery Utility available. Download the latest drivers for your S Flash OMAP3430 to keep your Computer up-to-date.
By the way has anyone managed to run omapflash commands on the Optimus 3D? I messed up my Sprint Gnex and i can no longer get to download/odin mode or fastboot. Xda-developers LG Optimus 3D Optimus 3D General Omap Flash Installer (4430) by marti701. To execute the x-loader and u-boot binaries at boot up from NAND flash.
0 kommentar(er)
